Astoria (Flexx Boot) FB4000 Universal Replacement Rack & Pinion Steering Boot
The Flexx Boot FB4000 is a universal replacement boot for rack and pinion steering mechanisms. This installation kit includes an installation cone and two wire straps. The FB4000 is compatible with over 97% of the world’s cars that feature rack and pinion steering. The boot is made of rugged, specially formulated high stretch rubber.
Rack & Pinion Boot Fitting Instructions
The Rack & Pinion Boot Kit includes an installation cone that allows for the replacement of the boot without removing the tie rod end.
Realignment of the vehicle is not necessary after installation.
1- Remove the outer tie rod retaining nut and detach from spindle
2- Remove the old boot and clean the assembly
3- Cut the boot to the next diameter smaller than the steering rack body
4- Position the installation cone over the tie rod end threads
5- Lubricate the inside of the boot and cone
6- For easier installation, roll the boot back on itself, push it on the rack, and then push the rolled part onto the rack
7- Make sure to position the vent downwards so that any moisture drains out
8- Install tie straps and grease fittings. Reinstall the tie rod end and tighten the ball joint retaining nut to manufacturers specs.
Note : The rack & pinion boot can also be installed in the traditional way by separating the outer tie rod from the inner tie rod.
This method might necessitate a wheel alignment.
Features
One year guarantee.
Specifications
Manufacturer : Astoria 2000
Brand : FLEXX BOOT
Item Weight : 7.4 ounces
Package Dimensions : 5.39 x 4.8 x 4.06 inches
Item model number : FB4000
Is Discontinued By Manufacturer : No
Manufacturer Part Number : FB4000
Folding : No
